WARNING
To avoid reduction of sound output and damage
to the speaker, ensure that the speaker is
mounted with the wires exiting from the right
side of the speaker when looking at it from the
front.
-4-
EXISTING
SCREW
PLASTIC
SHIELD
290A3503
SPEAKER
MOUNTING
BRACKET
PLASTIC
SHIELD
EXISTING
SCREW
SHEET METAL
PANEL 1/8"
2" CLEARANCE TO THE NEXT OBJECT
SHEET METAL SCREWS, 1/4" x 5/8"
SPEAKER
Figure 3.
e.
Secure the bracket to the mounting surface
using the previously removed screw, three 1/4" x 5/8"
type B screws and 1/4" lockwashers. Position the front of
the speaker forward and secure the speaker to the
bracket using the 5/16-18 x 3/4" bolts and 5/16"
lockwashers.
f.
Connect the two leads from the speaker to
the electronic siren’s speaker cable.
WARNING
All effective sirens produce loud sounds which
may cause, in certain situations, permanent
hearing loss. You should take appropriate
precautions such as wearing hearing protection.
g.
Test the system for proper operation.
