MB-IDENT03 Identifier Board Installation, Maintenance, and Service Manual
4
MB-IDENT03 Identifier Board
Federal Signal
www.fedsig.com
5.
Carefully lift the upper Front Fastener Strip, lens/PC board assembly, and large mounting plate all
together. While keeping these parts together, place the light within the marked locations on the
outside surface of the window guard. Keep the wires away from any edges to avoid the chaffing of
wires after installation. See Figure 1.
Figure 1 Exploded Assembly View
1
2
3
4
6
5
Window guard not included
in MB-IDENT03 Message
Board Kit
6.
Once the light assembly is in position, insert one flat head machine screw through the top left hole
front fastener strip and through the assembly while the Rear Fastener Strip is being held on the
opposite side of the window guard. See Figure 2.
Figure 2 Side View of Message Board Mounted on Window Guard
