background image

Mounting Instructions for Impaxx

®

, MicroPulse™, and Viper

®

 EXT

4

Ford

®

 Interceptor Sedan

Figure 4  Mounting locations of clip nuts and lighthead

LIGHTHEAD MOUNTED 

BEHIND GRILLE

CLIP NUTS

REMOVED

290A6920

7.

  Connect the Impaxx, MicroPulse, or Viper EXT lights as described in the instructions provided with the 

lights.

8.

  Test the lights for proper operation.

Getting Technical Support and Service

Federal Signal Corporation will service your equipment or provide technical assistance with any problems 

that cannot be handled locally. Any product returned to Federal Signal for service, inspection, or repair must 

be accompanied by a Return Material Authorization number. The RMA number can be obtained from your 

local distributor or Federal Signal. Please provide a brief explanation of the service requested or the nature of 

the malfunction. Contact your local dealer/distributor for replacement parts availability or contact the Federal 

Signal Service Department (7 a.m. to 5 p.m., Monday through Friday, Central Time) at: 

Service Department 

Federal Signal Corporation 

2645 Federal Signal Drive 

University Park, IL 60484-3167 

800-433-9132 

800-343-9706 (fax) 

www.fedsig.com

© 2012 Federal Signal Corporation

Ford is a registered trademark of Ford Motor Company.

Impaxx, MicroPulse, and Viper are trademarks of Federal Signal Corp.

Summary of Contents for IPX-GRL5

Page 1: ... File these instructions in a safe place and refer to them when maintaining and or reinstalling the product This product contains high intensity LEDs Do not stare directly into the lights at a close range or permanent damage to your eyesight may occur Failure to follow all safety precautions and instructions may result in property damage serious injury or death Overview This publication has instru...

Page 2: ...odge the equipment causing serious injury or death To mount the lights to the grille 1 Route the wire from the lighthead through the mounting bracket DRILLING PRECAUTIONS Check the area into which you are drilling to be sure you do not damage vehicle components All drilled holes should be deburred and all sharp edges should be smoothed All wire routings going through drilled holes should be protec...

Page 3: ... on the grille as shown then reinstall them to hold the bracket to the underside of the grille 5 Repeat step 4 on the other side of the grille 6 Connect the lights as described in the instructions provided with the lights 7 Test the lights for proper operation 8 Reassemble the vehicle per the manufacturer s service manual Figure 2 MicroPulse attached to bracket MPS3 MPS6 290A6919 Figure 3 Viper at...

Page 4: ...eral Signal for service inspection or repair must be accompanied by a Return Material Authorization number The RMA number can be obtained from your local distributor or Federal Signal Please provide a brief explanation of the service requested or the nature of the malfunction Contact your local dealer distributor for replacement parts availability or contact the Federal Signal Service Department 7...

Reviews: