13
Configuring the Network Interface
Description, Installation, and Configuration Manual
Federal Signal
www.fedsig.com
Figure 3 Typical IP Phone Setup
Configuring the Network Interface
To configure the network interface through the web browser:
1. Before installing the IP Phone on an IP network, connect
your PC to the IP Phone via the PC port using the Ethernet
cable provided. Turn on your PC.
2. Change your Local Area Connection (Ethernet) adapter
address to 10.10.10. your number. The following is an
example:
IP Address: 10.10.10.100
Subnet Mask: 255.255.0.0
Default Gateway: 10.10.10.100
Your IP Address and Default Gateway need to match.
Changing your IP Address allows you to access the IP Phone
at its default IP address (10.10.10.100).
