Installation and Service Instructions
4
Mounting the eHorn-HV
The eHorn-HV can be mounted on any relatively flat surface with the supplied
mounting brackets. The mounting surface must be capable of supporting the
weight of the eHorn-HV. Four installer-supplied 1/4" screws are required. Use
screws that are suitable for the mounting surface.
For dimensions, see Figures 1 and 2.
To secure the eHorn-HV to the mounting surface:
1. Hold the eHorn-HV against the mounting surface and use the four mounting
holes on the bracket as a template. Scribe drill-position marks on the
mounting surface.
2. Remove the eHorn-HV and drill a hole at each mark.
3. Secure the eHorn-HV to the mounting surface using installer-supplied
1/4" screws.
Figure 1
Depth and Height
with Bracket
Figure 2
Width and Height
with Brackets
9.43"/ 239.5 mm
.67"/ 17.0 mm
7.33
"/ 186.2 mm
6.68
"/ 169.7 mm
Weather pack sealed 2
contact male connector
9.43
"/ 239.5 mm
7.62
"/ 193.5 mm
6.0
"/ 152.4 mm
11.48"/ 291.6 mm
4X Ø
0.27"/ 6.85 mm
10.75"/ 273.1 mm
