14
Installing the Mobile Camera System
2. To access the mounting holes in the base as a guide for marking
drill-position holes, remove the four screws that secure the cam-
era cover (Figure 2, step 3).
290A6047B
Figure 2. Side-view camera installation
(CAMCCD-SIDENTSC/CAMCCD-SIDEPAL
3. To verify the orientation of the camera in its housing before the
installation, connect the camera to the monitor and turn on the
system.
You can adjust the camera assembly inside the housing for either
the left or right side of the vehicle. If the image on the moni-
tor appears upside down on the preferred installation side of the
vehicle, use the Allen wrench to remove and flip the camera as
-
sembly 180 degrees. Then install it to switch the camera from a
left-side-view camera to a right-side-view camera or vice-versa.