8
Installation and Maintenance Instructions
Model 371LED-120 Rotating Light
Pipe Mounting the Light
Attach the light to the 1-inch NPT pipe by threading the light
clockwise on the pipe (Figure 1). For information on making the
electrical connections, see “Wiring the Light” on page 9.
Figure 1
Mounting options
371LED-120 LIGHT
ASSEMBLY
PIPE MOUNT
SURFACE MOUNT
GASKET
MOUNTING
SURFACE
1/4" FLATWASHERS
DRILL THREE 9/32"
(7.143 mm) HOLES
1/4" SCREWS
1" NPT
PIPE
290A6859
Surface Mounting the Light
To mount the light on a flat surface:
1.
Using the
gasket as a template, scribe four drill-position
marks on the mounting surface (Figure 1).
2.
Drill a 9/32-inch (7.1 mm) diameter hole at each of the
outside drill-position marks for mounting.
3.
Drill or punch a 1-3/8 inch (34.9 mm) diameter hole at the
center drill-position mark for the wire entry.
4.
Attach a suitable 1-inch NPT hub or connector to conduit
