WARNING
Never use an abrasive material or file to remove corrosive products from threaded surfaces.
In extremely corrosive locations, equipment should be periodically inspected to guard against
unusual deterioration and possible porosity, since this may weaken the enclosure structurally.
SAFETY MESSAGE TO OPERATORS
Listed below are some important safety instructions you should follow:
• Read and understand all instructions before operating this unit.
• All effective warning speakers produce loud sounds which may cause, in certain situations,
permanent hearing loss. You should take appropriate precautions such as ensuring that the
recommendations in OSHA Sound Level Standard (29CFR 1910) 1910.95 are not exceeded.
• Although your warning system is operating properly, it may not be completely effective. People
may not hear or heed your warning signal. You must recognize this fact and ensure that your
warning signal is achieving the desired effect.
IV. SERVICE.
The Federal factory will service your equipment or provide technical assistance with any problems
that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be accompanied by a
Return Material Authorization. This R.M.A. can be obtained from the local Distributor or
Manufacturer’s Representative.
At this time a brief explanation of the service requested, or the nature of the malfunction, should
be provided.
V. EC DECLARATION OF CONFORMITY.
Manufacturer’s Name:
Federal Signal Corporation
Manufacturer’s Address:
2645 Federal Signal Drive
University Park, IL 60466-3195
U.S.A.
declares that the Product
Type of Equipment:
Explosion-Proof Horn
Brand Name (if any):
Model Number(s):
31X
conforms to the following Standards:
EMC:
EN 55014: 1993
EN 55104: 1995
Supplementary Information:
This statement confirms that the product fulfills the EMC requirements of the Council Directives
89/336/EEC and 92/31/EEC.
Manufacturer’s Signature:
Position: Engineering Manager
Location: Illinois
Date: 09/25/96
3
