INTRODUCTION
You have made a major investment in a fine piece of
equipment. Keep your investment sound by reading these
instructions before installing this unit. This will ensure that
the full potential of this equipment is achieved. It will also
be helpful in avoiding any needless service costs or
operational problems. Included in these instructions are
safety rules, installation, operation, and maintenance
instructions.
Only the highest quality components were used in the
construction of your unit. With proper maintenance, your
system should provide years of economical, trouble-free
service.
WARNING
A QUALIFIED INSTALLER MUST PERFORM INSTALLATION AND
SERVICE.
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE,
MAINTENANCE, OR USE CAN CAUSE EXPLOSION FIRE,
ELECTRICAL SHOCK, OR OTHER CONDITIONS WHICH MAY
CAUSE DEATH, PERSONAL INJURY, OR PROPERTY DAMAGE
AND WILL VOID THE WARRANTY. REFER TO THIS MANUAL FOR
PROPER INSTRUCTIONS.
DO NOT DESTROY THIS MANUAL. PLEASE READ CAREFULLY
AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE BY A
SERVICE TECHNICIAN.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS, OR OTHER COMBUSTIBLE MATERIALS
IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.
BEFORE PERFORMING ANY WORK ON THIS EQUIPMENT,
POWER SUPPLY MUST BE TURNED OFF AT THE HOUSEHOLD
SERVICE BOX TO AVOID THE POSSIBILITY OF SHOCK, INJURY,
DAMAGE TO EQUIPMENT, OR DEATH.
CONSULT A QUALIFIED INSTALLER FOR INFORMATION OR
ASSISTANCE.
NOTES TO INSTALLER
The words “SHALL” and “MUST” indicate a requirement
which is essential to satisfactory and safe product
performance. The words “SHOULD” and “MAY” indicate a
recommendation or advice which is not essential and not
required but which may be useful or helpful.
Installation and service personnel are required by some
locales to be licensed. Persons not qualified SHALL NOT
install this equipment nor interpret these instructions.
This installation and maintenance manual is provided to
ensure the proper installation and the most satisfactory
performance of your equipment. The instructions contained
herein SHALL NOT be deemed to extend, modify, alter or
expand any of the representations contained in the limited
warranty.
CODES
The installer SHALL comply with all local, state, and federal
codes and/or regulations pertaining to this type of equipment
and its installation. Such codes and/or regulations should take
precedence over any recommendations contained herein in lieu
of local codes. Installations SHALL be made in accordance with
the National Electrical Code, local codes and recommendations
made by the National Board of Fire Underwriters. Consult local
building codes and National Electrical Code (NEC) for special
requirements.
1
RECOGNIZE SAFETY SYMBOLS,
WORDS AND LABELS
What You Need To Know About
Safety Instructions
Warning and Important Safety Instructions appearing in
this manual are not meant to cover all possible
conditions and situations that may occur. Common
sense, caution and care must be exercised when
operating or cleaning tools and equipment.
Always contact your dealer, distributor, service agent or
manufacturer about problems or conditions you do not
understand.
DANGER
indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
WARNING
indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION
indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
CAUTION
used without the safety alert symbol
indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
DANGER
WARNING
CAUTION
CAUTION
INSPECTION AND UNPACKING
A thorough inspection of the shipping container should be
made immediately upon receiving the unit. Look for any
punctures or openings, and if it appears damage has occurred,
it should be noted on the freight bill before signing. The
delivering carrier should be contacted immediately to inspect
damage, and no installation work should begin until this
inspection is completed.
Locate rating plate on unit corner panel. It contains
information needed to properly install unit. Check rating plate
to be sure unit matches job specification.
Rating plate located inside
control box cover
