background image

 

Rev. 1.00 

- 23 -

FEC-150

8-2 Parallel (IEEE1284) Interface Windows Driver Setting 

 

1. After executing the proudct setting CD, go to Thermal Printer > FEC-150 > Drivers > 

Windows Driver > Drivers folder > exectute FEC-150_WIN_Vx.x.xx.exe 

2. Select “Next” from the window at the initial setting. 

3. Install Select “Install” from the “Ready to Install the Program” window. 
4. Select a serial port from the "Select Port Type”, and then select “Next”. (See Fig 1) 
5. The computer will reboot after selecting an example from the “Question”. 
6. Upon reboot, operate as follows: Start > Setting > Printer and Scan > FIRICH FEC-150 

Icon > Right click > Select “Property”. 

7. After selecting the “General” from the “Property” window, select test page for printing 

and make sure whether the speed is faster. 

 

8-3 USB2.0 Interface Model Windows Driver Setting 

 
1. After executing the proudct setting CD, go to Thermal Printer > FEC-150 > Drivers > 

Windows Driver > Drivers folder > exectute FEC-150_WIN_Vx.x.xx.exe 

2. Select “Next” from the window at the initial setting. 
3. Install Select “Install” from the “Ready to Install the Program” window. 
4. Select a serial port from the "Select Port Type”, and then select “Next”. (See Fig 1) 
5-1. For WINDOW 2000/VISTA/2008 Server/7 

 Open the “Information” window, restart the printer after power it off, and then select 
“OK”. 

  The computer will reboot after the setting is completed. 

5-2. For WINDOW XP/2003 Server 

 Open the “Information” window, restart the printer after power it off, and then select 
“OK”. 

 Open the “New hardware check” window, select “Proceed to next”. The computer will 

reboot after the USB driver setting is completed. 

 

 Reference 

Click “OK” or “Continue Anyway” when the information related to the electronic signature 

appears during the setting process. 

 
6. Upon reboot, operate as follows: Start > Setting > Printer and Scan > FIRICH FEC-150 

Icon > Right click > Select “Property”. 

7. After selecting the “General” from the “Property” window, select test page for printing 

and make sure whether the speed is faster. 

 

Summary of Contents for FEC-150













































Reviews: