background image

    PAGE 2 OF 9

WARNING: Any use of this appliance other than that recommended by the manufacturer in this owners manual 
may cause fire, burns, electric shock and/or other serious injuries or death.

SAVE THESE INSTRUCTIONS

When using electrical appliance, basic precautions should always be followed to avoid the risk of fire, electric 

shock and injury to persons including the following:
 1. 

Read all instructions before using this appliance.

 2.  This appliance is hot when in use.  To avoid burns, do not let bare skin touch hot surface.  If provided, use 

handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, 

papers, clothes, and curtains, etc. at least 3 feet (0.9 meter) away from the front of the appliance.  Keep all 

items away from the sides and rear.  

 3.  Extreme caution is necessary when the appliance is used by or near children or invalids and whenever the 

appliance is left operating and unattended.  

 4.  Always unplug appliance when not in use.  

This unit should be operate under supervision and should 

not be left on without supervision.

 5.  Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, has been 

dropped or damaged in any manner.  Return appliance to authorized service facility for examination, 

electrical or mechanical adjustment or repair.

 6.  Do not use outdoors.
 7.  This appliance is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate 

appliance where it may fall into a bathtub or other water container.  

 8.  Do not run cord under carpeting.  Do not cover the power cord with throw rugs, runners, or similar floor 

coverings. Arrange cord away from traffic area and where it will not be tripped over.

 9.  To disconnect the appliance, turn all controls “OFF”, then remove the plug from the electrical outlet. 
 10. Connect to properly grounded outlets only. 
 11.  Do not insert or allow foreign objects to enter any ventilation or exhaust openings as this may cause an 

electric shock or fire, or damage the appliance.

 12. To prevent a possible fire, do not block air intakes or exhausts in any manner.  Do not use on soft surfaces, 

like a bed, where openings may become blocked.  

 13. All electrical appliances have hot and arching or sparking parts inside.  Do not use in areas where gasoline, 

paint, or flammable liquids are used or stored.

 14. Use this appliance only as described in this manual.  Any other use which is not recommended by the 

manufacturer may cause fire, electric shock, or injury to persons.

 15. 

It is strongly recommended that to use the entire 15 amp outlet for the electric fireplace only.

  Sharing 

the outlet with another electronic item could create overload and damage the outlet and electric items in the 

long term.

 16. Avoid using an extension cord because the extension cords may overheat and cause a risk of fire.  However, 

If an extension cord MUST be used, the cord must be No. 14AWG minimum size and rated not less than 

1875 Watts.  The extension cord must be a 3-prong cord with grounding type plug and cord connection and 

should not exceed 20’ (6m) in length.

 17. When transporting or storing the appliance, keep both the unit and power cord / plug dry, free from excessive 

vibration and away from heat sources to avoid causing fire, electric shock, or injury to persons.

 18. Do not attempt to burn wood or other materials in this appliance.
 19. This appliance, when installed must be electrically grounded in accordance with the current.

SKU#810392525

PRODUCT# 18IN-23-130

Canada: CSA C22.1, Canadian Electrical Code 

U.S.A.: ANSI/NFPA NO. 70, National Electrical Code

IMPORTANT SAFETY INSTRUCTION

Summary of Contents for 15IN-23-101










Reviews: