commands or from the Google Home or Amazon Alexa apps. With the latter, to stop the
shutter when it is moving, the voice command must start with "Alexa, pause (name given to
the shutter)".
Repeater mode: when you have a button connected to multiple actuators and the furthest
actuator is out of range, you can set the closest actuator to act as a signal repeater, thus
extending the operating range. The signal of each button of the system is not repeated, but
only of the one connected to the actuator that must repeat the signal. Obviously, the others
downstream must also be connected to the button, otherwise the signal they receive has no
effect on them. To activate the repeater mode, simply press the pairing button of the
actuator on which you want to activate the mode for about 7 seconds, i.e. when the signal
LED changes from slow ashing to faster ashing, at this point the button can be released
and the mode is activated. This mode is particularly useful in the case of a button such as the
9320/2 or 9320/4T used in coordinated mode to manage the general ON and OFF of different
actuators at a certain distance from each other.
To reset a connection between the actuator and the button, press the pairing button for
about 12 seconds, at which point the LED indicator will start ashing, will remain lit brie y
and then go off, at this point release the button. When this sequence is nished, the actuator
and button will be disconnected.
If you change your Wi-Fi password or if you change your router, repeat the process described
above for connecting to a Wi-Fi network, including resetting the Wi-Fi settings if the LED is
not blinking rapidly.
The actuator supports the automatic detection of the wired switch type (rocker or push
button): after the controller is powered on, press the wired switch once to set the wired
switch type. To reset the wired switch type, power off the controller and the power it on
again.
5 - Caratteristiche tecniche
Power supply: 110~240 VAC 50/60Hz
Maximum current: 1.7 A
Maximum power: 390W at 230V
Wireless network: Wi-Fi IEEE 802.11 b/g/n 2.4G & RF 433MHz
Operating distance: Indoor <= 25m / Outdoor <= 60 m
Operating temperature: -5 - 50°C
Dimensions: 44 x 44 x 22 mm
6 – Troubleshooting
The device does not connect to Wi-Fi:
◦
Check the ashing of the LED, as indicated in the Startup section;
◦
Verify that your router is set to use 2.4GHz Wi-Fi;