4 – Start up
In the image below nd the connection diagram of the module.
Important:
Always
remember to disconnect the house power when installing this product.
Connection diagram for the 9322
To pair the 9322 actuator with a FEB Easy wireless button, simply press the pairing button for
about 3 seconds, until the red LED indicator starts ashing, at this point press the button you
want to pair. Just press the button once. You will see that the red LED will stop ashing,
indicating that the two have been paired. The subsequent pairing will automatically refer to
the opposite direction of the motor and so on alternately. It is possible to connect more than
one button to the same actuator, up to a maximum of 10 buttons (5 pairs of controls for the
two directions of the motor). There are no limits, instead to the number of actuators that can
be controlled by the same button, simply repeat the pairing procedure between the button
and all the actuators that you want to be controlled by the same button.
To connect the 9322 actuator to your home Wi-Fi network, download the Smart Life app
from the Google Play Store, or from the Apple App Store. Touch the + sign in the upper right
corner and select "Add manually". Scroll down the page until you nd the product “Wi-Fi
curtain switch” and select it. At this point, start the connection, check that the network name
and password are correct and that there is a 2.4GHz network. The app will ask you to check
that the LED indicator is ashing rapidly and when you have con rmed it, the addition to the
network will begin. The process takes about 2 minutes, after which you will see your new
module successfully added to the app. At this point you can change the name and start
controlling it from your smartphone. In the app options you can create scenarios, links with
other devices, time schedules and pair the actuator with Amazon Alexa, Google Home, with
the IFTTT platform and various other IoT service providers.
If the LED is not ashing quickly, you can press the pairing button for about 10 seconds: the
LED will ash slowly, then quickly and eventually remain on steady, at this point, when it is
steady, release the pairing button. The device will be ready to proceed with pairing with a Wi-
Fi network as described in the previous point.
To connect the actuator to the voice assistants, you need to activate the Smart Life skills on
Google Home or Alexa, directly from their apps. At this point you can proceed with the
discovery of the devices available for connection and start controlling your 9322 with voice