can be controlled by the same button, simply repeat the pairing procedure between the
button and all the actuators that you want to be controlled by the same button.
To connect the 9321 actuator to your home Wi-Fi network, download the Smart Life app
from the Google Play Store, or from the Apple App Store. Touch the + sign in the upper right
corner and select "Add manually". Scroll down the page until you nd the “Wi-Fi Switch”
product and select it. At this point, start the connection, check that the network name and
password are correct and that there is a 2.4GHz network. The app will ask you to check that
the LED indicator is ashing rapidly and when you have con rmed it, the addition to the
network will begin. The process takes about 2 minutes, after which you will see your new
module successfully added to the app. At this point you can change the name and start
controlling it from your smartphone. In the app options you can create scenarios, pair it with
other devices, start time schedules and pair the actuator with Amazon Alexa, Google Home,
with the IFTTT platform and various other IoT service providers.
If the LED is not ashing quickly, you can press the pairing button for about 10 seconds: the
LED will ash slowly, then quickly and at the end it will remain on steady, at this point release
the pairing button. The device will be ready to proceed with pairing with a Wi-Fi network as
described in the previous point.
To connect the actuator to the voice assistants, you need to activate the Smart Life skills on
Google Home or Alexa, directly from their apps. At this point you can proceed with the
discovery of the devices available for connection and start controlling your 9321 with voice
commands or from the Google Home or Amazon Alexa apps.
Repeater mode: when you have a button connected to multiple actuators and the furthest
actuator is out of range, you can set the closest actuator to act as a signal repeater, thus
extending the operating range. The signal of each button of the system is not repeated, but
only of the one connected to the actuator that must repeat the signal. Obviously, the others
downstream must also be connected to the button, otherwise the signal they receive has no
effect on them. To activate the repeater mode, simply press the pairing button of the
actuator on which you want to activate the mode for about 7 seconds, i.e. when the signal
LED changes from slow ashing to faster ashing, at this point the button can be released
and the mode is activated. This mode is particularly useful in the case of a button such as the
9320/2 or 9320/4T used in coordinated mode to manage the general ON and OFF of different
actuators at a certain distance from each other.
To reset the connections between the actuator and all the buttons it is connected to, press
the pairing button for about 12 seconds: the LED indicator will start ashing, will remain lit
brie y and then go off, at this point release the button. When this sequence is completed,
the actuator will be disconnected from all the buttons.
If you change your Wi-Fi password or if you change your router, repeat the process described
above for connecting to a Wi-Fi network, including resetting the Wi-Fi settings if the LED is
not blinking rapidly.