3 - A detailed look at your device
Your Smart Actuator 9321
IN
: connection terminals for powering the module (110-240 Vac - 5A max)
OUT
: connection terminals for the load (110-220 Vac – 5A max)
Pairing button
: this button performs several functions. It is used to start the connection
procedure to the Wi-Fi network in your home, to start pairing with the FEB Easy wireless
buttons and to restore the device to factory settings. It is also possible to directly control the
actuator by pressing this button to turn the load on and off.
LED indicator
: an indicator that provides feedback on the status of the device. In normal
operation the LED indicates the status of the load: on when it is on and off when it is off.
When the product is started, the LED ashes quickly, to indicate that the actuator is not yet
connected to a Wi-Fi network.
Fuse:
in this point there is a 5A fuse. It protects your actuator from overcurrents. The fuse is
designed to break in the event of currents exceeding the 5A limit: if this happens, it can be
replaced with an equivalent one, to restore the 9321.
Antenna:
it is the antenna used to receive radio signals from the FEB Easy wireless buttons.
Fixing hole:
you can use this hole to attach the 9321 to a wall
4 – Start up
To pair the 9321 actuator with a FEB Easy button, simply press the pairing button for about 3
seconds, until the LED indicator starts ashing, at this point press the button you want to
pair. Just press the button once. You will see that the LED will stop ashing, indicating that
the two have been paired. It is possible to connect more than one button to the same
actuator, up to a maximum of 10. There are no limits, instead to the number of actuators that