– 7 –
Name
Function
Name
Function
(1) Display unit
(2) Power switch
Used to turn the power ON or OFF.
(3) Memory card
slot
(4) Memory card
ejection button
To remove the memory card from the slot,
press this button.
(5) Connector to
parameter
loader
(6)
Allows the Real time trend screen, Bar Graph
Display screen, Analog Meter Display screen,
Digital Display screen, Totalized Value Display
screen, Historical trend screen and other various
Parameter Set screens to be displayed.
When changing parameters by using a loader,
connect the exclusive cable (optional cable: Type;
PHZP1801 or USB cable [USB (A) male – USB
(mini B) male] to the connector.
Memory card
We recommend to use our separately-sold
compact flash which we ensure performance.
S1 REC key
S2 DISP key
• Used to start or stop recording.
Pressing once starts recording, and pressing once
again stops recording.
• U
sed to switch displayed contents. Every time it is
pressed, the display is switched in the following
order: (1) (2) (3) (4) (5) (6) (7) and back
to (1).
(1) Real time trend display
(2) Key guidance display
(3) Bar graph/analog meter display
(4) Digital display
(5) Totalizing data display
(6) Event summary display
(7) Ethernet log display
• Used to switch the parameter setting screen to
the data display screen.
S3 SEL key
• Used to switch from the data display screen to the
parameter setting screen.
• Pressing the key on the parameter setting screen
switches to the screen one step up.
Note, however, that pressing the key on the menu
screen does not change screens.
S4 Cursor key
(1) Used for selection on the setting screen or
registration of the set data.
(2) If the key is pressed while the scales are
displayed on the real time trend display screen,
historical trend display screen (*1), or recorded
data display screen, the channels for which
scales are to be displayed can be switched.
(Scale of ch1 scale of ch2 ….. scale
of ch9 scale of ch1 scale of ch2…..)
S5 ENT key
(1) Used to select setting items.
(2) Used to increase or decrease numerical values.
(3) Pressing the key on the real time trend
displays the historical trend screen (*1).
At this time, the window can be scrolled using
the cursor key.
(4) Pressing the or the key on the real time trend
display, bar graph/analog meter display, digital
display, or totalized value display screen
switches group screens as follows.
key: Group 1 2 3 4 5 6 7 8 1 ...
key: Group ... 1 8 7 6 5 4 3 2 1
*1: The screen in the past of the data
currently recorded
*1: The screen in the past of the data
currently recorded
Used for inserting the memory card.
Insert the card straight into the slot as shown in
upper right figure.
Be careful not to forcibly press the card if it is
inserted obliquely. Otherwise the pin on the PHW
may be damaged.
Caution
1. Do not remove the memory card during recording. Refer to the
another Manual in the CD-ROM “Removing memory card
(compact flash)” for the removal of the memory card while
recording is in progress.
2. After inserting the memory card into the slot, don’t remove the
card until the recorder can acknowledge it.
3. Be careful with static electricity when removing the memory card.
Caution
(1)
(2)
(3)
(6) (4) (5)
S5
S4
S3
S2
S1
Operation parts and their functions
3 Usage (Read before using)
