
42
FDT Technologies-
http://www.fdt.us
Note:
The FDT camera use the wired Ethernet cable by default, it will work on the
wireless status automatically if you disconnect the Ethernet cable. But the wireless will not
work if you still connect the Ethernet cable in your camera.
3) DDNS
Here you can set the third-party DDNS like Dyndns.org/3322.org/dynddns.us/No-ip.com
and the status of the UPnP for your camera. You can get the public IP address of the LAN
your camera works by click the “Query” button.
4) ONVIF
Here you can set the control configurations about ONVIF, such as enable status, port and
privilege. You can configure these information as the needs of your NVR, so FDT camera
can match your NVR best.