Document Number:
MAN – FD320CV-X
Rev:
A
Revision Date:
09/23/2019
Page 5 of 20
©
2019 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Rear Connector Orientation
The rear connector of this monitor can be mounted horizontally (connector perpendicular to
rear of monitor) or vertically (connector perpendicular to bottom of monitor) in order to give
you the most convenient mounting options. By default, this monitor's connector ships in the
rear/horizontal position. FDS Avionics Corp. will ship the unit with the optional
bottom/vertical mounting connector configuration if specified at the time of order; contact
your local sales representative for assistance. It is possible to change the connector
orientation at the time of installation. For instructions on how to change the connector
orientation please call FDS Avionics Corp. at
+1 (470) 239-7400
and ask for Technical
Support.
Power
This is a 28VDC monitor that requires 2.3 Amps of power to operate. The unit turns on
automatically upon power application.
Wiring Suggestions
All shields should be grounded to the connector at the source, and floating at the display.
Avoid routing video wiring parallel to:
•
AC wiring
•
Strobe wiring
•
DC motor supply cables
•
Inverter cabling
•
Or any other potential noise source.
