Document Number:
MAN
– FD215CV-C-6
Rev:
B
Revision Date:
01/11/2017
Page 5 of 16
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvionics.com
Wiring Suggestions
Avoid routing video wiring parallel to:
AC wiring
Strobe wiring
DC motor supply cables
Inverter cabling
Or any other potential noise source.
S-Video and Audio Wiring
Recommended cable for s-video and audio purposes is PIC 75 Ohm Coax, P/N V76261. This
is a lightweight, flexible, and low signal loss cable which meets FAA flammability requirements
of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4).
Similar aviation coaxial cable can be used from other vendors, as well.
Some aircraft are prone to AC noise - we recommend adding to the composite source a 75 Ohm
video isolation transformer such as Deerfield Laboratory, Inc. Part No. 162-1
(www.deerfieldlab.com, (650) 632-4090). In most cases this should be added to the video output
of the source.
