background image

 

Document Number: 

MAN 

– FD215CV-C-6

 

Rev: 

B

 

Revision Date: 

01/11/2017 

Page 15 of 16 

 

 

©

 

2017 FDS Avionics Corp.  

All Rights Reserved. 

TECHNICAL SUPPORT 

470-239-7421 or FDSAvionics.com

 

 

Limited Warranty 

All FDS Avionics Corp. (FDS) products are warranted to be free from material or manufacturing defects for a period 
of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for 
Government/Special Mission customers.   Any material  or  repair  workmanship  for  in  warranty  repair  service  will  be 
specifically warranted for 90 days or the remainder of the original warranty period, whichever is longer.  If the original 
warranty  period has expired,  the  90  day  repair  warranty  is  limited  to  the material  and  workmanship specific  to  the 
repair activity completed. 

The following conditions are exclusions to warranty coverage: 

1.  Labor costs associated with installation, removal or reinstallation of any product. 
2.  Damage to or malfunction caused by any unauthorized alteration made to the product. 
3.  Resolving  signal  quality  issues  caused  by  externally  generated  noise  introduced  by  aircraft  electrical 

systems or other components connected to any FDS product. 

4.  Any  malfunction  caused  by  improper  installation  or  connection  to  aircraft  wiring,  industry  standard  cabin 

management/ inflight entertainment systems, or third party commercial equipment not specifically identified 
as compatible with FDS products. 

5.  Any  malfunction  caused  by  installation  that  does  not  conform  to  precautions  associated  with  operating 

environments  listed  in  the  operating  manual  or  consistent  with  industry  best  practices  such  as;  high 
temperature, adequate ventilation, high humidity, high dust, or power surges. 

6.  Cosmetic  damage  or  damage  to  internal  components  caused  by  installation  or  removal,  failure  to  follow 

installation or operating instructions, or any neglect or misuse of the product. 

7.  Any product that is returned for service with a broken tamper evident seal, indicating tampering or improper 

handling of the product by an unauthorized person. Violation of product tamper evident seals or modification 
of factory installed serial and PMA labels voids any warranty, either expressed or implied. 

The  FDS  technical  support  team  is  available  to  provide  distance  troubleshooting  support  during  business  hours 
(8:00am to 5:00pm EST) Monday through Friday at (470) 239-7421. 
 
Many  repair  requests  can  be  resolved  through  distance  support and may  not  require  return  of merchandise  to  the 
factory.    If  a  product  must  be  returned  to  the  factory  for  repair,  an  RMA  number  will  be  issued  as  directed  by  the 
technical support team and communicated by the repair coordinator.   
 
Upon  request  by  the  customer,  FDS  may  send  a  service  technician  onsite  to  repair  any  non-PMA  products.    The 
travel expenses incurred to include transportation, lodging and meals along with the technician’s hourly rate shall be 
payable by the customer in accordance with FDS’ applicable rates and procedures. 
 
FDS Avionics Corp. will, upon receipt of returned merchandise, remanufacture or replace the unit at our discretion 
and return the product by Ground Return Shipping.  Express return shipment will be the responsibility of the sender. 
 
This warranty is not transferable. 
 
Any implied warranties expire at the express limited warranty expiration date.  FDS shall not be held liable for  any 
indirect, special, punitive, incidental or consequential damages. 
 
Some states do not allow limitation on the length of an implied warranty.  In such states, the exclusions or limitations 
of this limited warranty may not apply. 

Summary of Contents for FD215CV-C-6

















Reviews: