50 GROUPS OF CTCSS FREQUENCY
67.0 85.4 107.2 136.5 165.5 186.2 210.7 254.1
69.3 88.5 110.9 141.3 167.9 189.9 218.1
71.9 91.5 114.8 146.2 171.3 192.8 225.7
74.4 94.8 118.8 151.4 173.8 196.6 229.1
77.0 97.4 123.0 156.7 177.3 199.5 233.6
79.7 100.0 127.3 159.8 179.9 203.5 241.8
82.5 103.5 131.8 162.2 183.5 206.5 250.3
104+1 GROUPS OF DCS CODE
023 065 132 205 255 331 413 465 612 723
025 071 134 212 261 332 423 466 624 731
026 072 143 223 263 343 431 503 627 732
031 073 145 225 265 346 432 506 631 734
032 074 152 226 266 351 445 516 632 743
036 114 155 243 271 356 446 523 645 754
043 115 156 244 274 364 452 526 654
047 116 162 245 306 365 454 532 662
051 122 165 246 311 371 455 546 664
053 125 172 251 315 411 462 565 703
054 131 174 252 325 412 464 606 712
Note: CTCSS and DCS can set between the highest frequency and lowest frequency.
TRANSMIT CDC
Under channel mode, press [FUN]+
limkey
to enter the menu mode, turn the channel switch to until
item, the screen will shows "T-CDC?", pressl!D key and turn the channel switch to select the CTCSS
(OFF-254.1 ). press the SIDE KEY 3 you can switch between CTCSS and DCS. DCS range is OFF
D754. Press SIDE KEY 4, you can select the normal (N) or inverted (I) DCS codes. After selection,
pressm, key to confirm and pressm key to exit.
FREQUENCY STEP
Under frequency mode, press [FUN]+
limkey
to enter the menu mode, turn the channel switch until,
the screen will shows "STEP?", press
m,
key turn the channel switch to select "2.5K/5K/6.25K/1 OK/
12.5K/25K/50K/100K".(UHF default is 12.5K). After selection press
m,
key to confirm and pressm
key to exit.
ROGER BEEP
Under frequency/channel mode, press [FUN]+
m
key to enter the menu mode, turn the channel swi
tch until the screen shows "ROGER?", press
l!Dkey
and turn the channel switch to select "OFF/ON",
"OFF" means turn off the Roger Beep function. After selection pressl!D key to confirm and pressm