NO.
Indication and description
8
BEEP (keytone)
9
KEYBO (keyboard lock)
10
SCANS (scan mode)
11
VOICE (voice guide)
12
C-CDC (RX/TX CTCSS/DCS)
13
R-CDC (RX CTCSS/DCS)
14
T-CDC (TX CTCSS/DCS)
15
STEP (frequency step)
16
ROGER (call end tone)
Definition
ON/OFF
MANUAL/AUTO
TO/CO/SE
OFF/ENG
OFF-254.1/D023-D754
OFF-254.1/D023-D754
OFF-254.1/D023-D754
2.5K/5K/6.25K/1 OK/12.5K/25K/50K/1 OOK
OFF/ON
All channel scan
Hold on [F] key, and press 11111 key, "SCAN?" will show on the screen, Then press GD key to enter all
channel scan mode, and scan starts with the displayed channel and it will pause for 5 seconds if any
signal is detected on a channel, otherwise it will continue to scan next channel. Press any keys except
[PTT] key and GD key to stop scanning and return to the previous displayed channel.
Priority channel scan
Press [F] key, then press 11111 key and turn the channel switch, then "PRI?" will show on the screen,
Then press GD key to enter priority scan mode, and scan starts with the priority channel and it will pa
use for 5 seconds if any signal is detected in a channel, then it will scan other channels in turn, press
any keys except [PTT] key and GD key, it will stop scanning and return to the previous displayed cha
nnel.
Otherwise it will scan the next channel. For instance, if channel 3 is set as priority channel, the radio
will scan 3-1,3-2 in turn. The Priority channel has been set on the FDP Pro as Channel 40 as default.
This can be changed by the authorised FDP dealer.
VOX SENSITIVITY(VOX)
VOX allows you to perform transmission by voices activation without pressing PTT key, and the radio