![background image](http://html1.mh-extra.com/html/fdi/yg-s7g2-70c-mdk/yg-s7g2-70c-mdk_user-manual_3736543009.webp)
ΣYG-S7G2-70C-MDK
User’s Manual
6/26/2017
Copyright ©2017,
Future Designs, Inc
Page 9 of 26
Getting Started
2.1
Setting up the Hardware
The SOMDIMM should be inserted into the DIMM Socket as shown below and then
locked into place by pushing down to the Carrier Board. Ensure the SOMDIMM is inserted
completely into the socket prior to locking. The socket utilized on the CARRIER Board is
rated for a minimum of 25 insertions.
Figure 3: SOMDIMM Insertion
The following are step by step instructions for setting up the hardware.
1)
Make sure you have a SOMDIMM board plugged into the CARRIER board at J1.
2)
Verify the LCD Interface ribbon cable connects the LCD CARRIER board to the CARRIER (J7)
board.
3)
With the power off, plug the 5V center-positive Power Supply into 5V (P5) of the CARRIER
board.
4)
Connect an RJ-45 Ethernet cable to the ETHERNET (J5) interface of the CARRIER board.
5)
Plug in a female-to-female DB9 serial cable between PC and RS232 (P4) on the CARRIER board.
6)
Insert the microSD card with the demonstration files (included) into microSD connector on the
SOMDIMM.