2
5.
ESD Warning
The uEZGUI-EXP-DK is shipped in a protective anti-static package. The device must not be subjected to high electrostatic
potentials. Damage may occur to the board that will not be covered under warranty. General practice for working with
static sensitive devices should be followed when working with the uEZGUI-EXP-DK.
6.
Startup Procedure
To get started with the uEZGUI-EXP-DK, please connect the 50 pin and 20 pin FFCs to the uEZGUI as shown. The uEZGUI-
RX62N-35QT does not support the 20 pin expansion. Take care not to damage the FFCs as they are very fragile.
uEZGUI-1788-43WQR with uEZGUI-EXP-DK (revision 1 is shown in this picture)
After connecting the cables, connect a 7V-24V DC power supply (minimum of 1A) to the 2.1mm barrel plug P8 on the
EXP-DK to power on the unit. With uEZ 2.05 or later, the EXP-DK will be auto-detected and the USB ports, Ethernet,
RS232, Audio, and high-speed microSD SD card will be automatically enabled. At this time the high speed microSD card is
only support on LPC1788 uEZGUI units. The out of the box demo does not include the video player. This will need to be
enabled inside of the project’s Config_Build.h file.
7.
Mechanical Details
The uEZGUI-EXP-DK has 5 screw mounts that accept #6 size screws. The total board dimensions are 5” x 6”.
Each of the 4 corner screw mounts is centered 0.2” away from each side of the board.
