10
19.
Potentiometer – VRES
The UEZGUI-EXP-DK Board includes one Potentiometer connected to the host uEZGUI’s ADC input.
JP18 Pin Number
Description
1-2
3.3V
3-4
Output to ADC
5-6
Ground
20.
FET Driver – J10
The UEZGUI-EXP-DK Board includes one FET driver port that is controlled by a GPIO. The 3 jumpers must be loaded in
the configuration shown below for the FET driver to be enabled.
J10 Pin Number
Description
1
Ground (FET Source gate)
2
Ground (FET Source gate)
3
FET Drain gate
4
FET Drain gate
5
FET Drain gate (through diode D10)
6
FET Drain gate (through diode D10)
21.
DALI – J12 (not loaded by default)
The UEZGUI-EXP-DK board includes one DALI interface. Nine parts must be manually loaded to enable DALI support.
Look at the schematic for details on loading DALI.
The 4 jumpers must be loaded on JP14 pins 1 – 2, 3 – 4, 5 – 6, and 7 – 8 for the DALI port to be enabled.
J12 Pin Number
Description
1
DALI DP
2
No Connect
3
No Connect
4
DALI MP
