uEZ GUI Start Here Guide
UEZGUI-1788-43WQR
Rev. 1.11 Aug 31, 2016
Page 27
Congratulations! This concludes the walkthrough for building a simple GUI! Professional
looking designs with complex functionality can be designed using advanced features
provided in the emWin and µEZ libraries. Documentation and support for learning these
features is available through Future Designs, Inc. for emWin and µEZ libraries.
The following optional section, provides instructions for how to restore the factory
demo to the µEZ GUI if desired.
5.
Restoring the Out-of-Box (OOB) Demo (Optional)
1.
Remove the SD card from the µEZ GUI.
2.
Insert the µEZ GUI’s SD card into the PC (depending on your PC, an SD card reader or
adapter may be required).
3.
In the root directory of the SD card, the folder titled “OOB Demo” contains the flash
binary and a J-Link script that will flash the original out-of-box to the connected µEZ
GUI.
4.
Connect the PC to the µEZ GUI via the J-Link debugger probe and double-click the
“Install OOB.jlink” script. This reinstalls the OOB demo onto the µEZ GUI.
Figure 21:
OOB Demo
Files
Figure 20:
OOB Demo
Directory
Figure 19:
Final
Screen
