background image

Press again to turn on High heat. (Lights illuminated 

●●

Pressing a third time turns the heater off and 10s later the fan switches off (Lights 
illuminated 

○○

 
 
Operating by Remote Handset

 

 

Multifunction Infrared Remote Handset. 
 

Make sure the batteries are installed properly in the remote control. 
The effective range of the remote control is up to 4 meters or 13 feet.  
 
 
 
MAINTENANCE 

 
Warning: 
Before performing any maintenance or cleaning of the appliance 
disconnect the unit from the power supply and leave until cool. 
 

Remote Handset Battery Replacement 

Replace with two AAA batteries. Make sure the batteries are installed correctly in the 
remote control. 
 

Maintenance of Motors 

The motors used on the fan and flame effect are pre-lubricated for extended bearing 
life and require no further lubrication. However, periodic cleaning/vacuuming of the 
fan/heater unit is recommended. 
 

Resetting the Thermal Cutout Switch 

The appliance is fitted with an Electronic Safety Control (E.S.C). This is a safety device 
which switches off the fire if, for any reason, the appliance overheats. An example 
being if the fan heater outlet gets covered or blocked. If the heater stops operating 

 

ICON 

TITLE 

FUNCTION 

 

POWER 

Pressing once turns the appliance and flame effect on. Pressing 
again turns the appliance and flame effect off. 
 

 

FLAME 

The appliance has four flame effects. Each time the button is 
pressed the unit will cycle through a different effect. 
 

 

HEATER 

Press once to turn Low heat on. (Lights illuminated

●○

Press again to turn High heat on. (Lights illuminated 

●●

Press a third time to turn the heater off. (Lights illuminated 

○○

 

 

TEMP 

The digital display shows a default TEMP setting. To set the 
desired room temperature press the button and the display will 
increase by 1°C from 16°C to 28°C when pressed each time. 
The heater will cut out automatically once the desired 
temperature is reached. By pressing and holding this button for 
3 seconds the display will change between °C and °F. 
 

 

TIMER 

Once the appliance has been turned on you can program the 
length of time you would like the appliance to run. Cycles from 
OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, to 9H. 
 

Summary of Contents for Staten









Reviews: