- 30 -
7
．
2
．
10 System paramters Settings
System time calibration
The type of temperature sensor, temperature sensor is
based on the type of hardware, the circuit is determined,
no need to modify the sensor model.
The interval between the 60 data points, which is the
interval between the data of the historical data curve, and
the interval between the adjacent data is the interval
between the adjacent 2 data.
Loop display, select the YES, then all information,
flow,velocity,current,relay,historical data,
temperature (if set the display) to loop display.
Backlight settings, always and moment,
moment for the back of the display backlight 30S.
The display content is set for setting the content
displayed when the power is on.
The interval between the interface and the interface
shows the interval between the interface and the
interface.
When the buzzer is turned on or off, the key is pressed to
open, then the buzzer rings.
Temperature interface is displayed, set to display, the
display interface can be found in the temperature value.
The temperature coefficient is the a coefficient in the
formula, and the temperature deviation is the b
coefficient in the formula. T= at+b
