ASSEMBLE STEPS
Assembling of car must be operated by adult.
Choking hazard-small parts.not allow children to touch and play!
Please check the quantity of all parts before assembling.
Please keep the PP bag carefully.choking hazard,prohibit children to play it!
Tools of assembling: screwdriver,scissors(not included)
1 .Assemble wheels:
①
Place the car upside down on a flat surface.
②
Assemble rear wheels:
Double-motor version: Insert the rear wheel into the rear shaft by pushing
the wheel center, then snap wheel cover in place. Repeat for opposite side.
Single-motor version:
Insert the washer, wheel and wheel cover in place for the left side. Insert the
wheel and wheel cover in place for the right side.
③
Assemble front wheels: Insert the washer, front wheel (pushing the wheel
center to the shaft) and wheel cover in place. Repeat for opposite side.
wheel cover
wheel cover
wheel cover
wheel cover
Front wheel
Front wheel
Front wheel
Front wheel
Washer
Washer
Washer
Right
Left
Back
Front
Note:Only for single-motor version.
①
Complete rear wing assembly first,
then insert the rear wing unit into car
body and press down until it 'snap'
securely.
②
Put the seat into car body, and install
seat screws 4x12mm 8mm securely.
2.Assemble other parts:
Installation of rear wing
Screw
4×12mm 8mm
Screw
4×12mm 8mm
5
