Terminal
Information
24V - GND
24V DC Out
Voltage supply
For external devices, e.g. for sensors, terminal.
E1 - GND, E2 - GND
Analog In 1 / 2
Analog inputs
For speed setting signal or sensor signal. Connection depending on programmed
function, see selection Mode.
GND, A (D+), B (D-)
RS-485 MODBUS
Interface for networking via MODBUS RTU.
"A (D+)" must always be connected to "A (D+)" of the next devices, the same applies
to "B (D-)".
In addition, a "GND" connection must be established, as dissimilar potential (over
10 V!) will lead to the destruction of the RS-485 interface (e.g. lightning).
Quick Start Guide
Fcontrol
–
model series FXDM
Electrical installation
L-BAL-E223-GB 1623 Index 003
Part.-No. 00153236
11/22
