V.3.03 www.FlyCamOne.com
suggests different programs to open the files. Select the file explorer if you are not
sure which one to take. To watch the videos always copy the files to your
computer before playing. It might be possible that the movies stops or the player
shut down. Do so as well with photos or audio files. In case no window appears,
click to „computer“ to find the camera as a drive there.
Using at a model
To fix the camera to a model exchange the screen again by the battery cover.
Save the cam, fixing it to the model using the eyelet (20) as well.
Live Video transmission
The optional available FCOIII Transmission Set
with
2,4GHz/10mW or 5,8GHz/25mW transmits
the
Video signal up to a range of
300m
Due to the application;
interferences may cause
the live stream. The recorded video stored at
the card will not be affected! The signals of the
cameras sender might interfere the control
signals of
other units. (2,4GHz Transmission Set and use of
2,4GHz RC-Set).
Avoid errors by doing a range test and make sure not to affect other
systems!
The Camera sender has the same base and will be fixed in the same way.
Remote the FCOIII:
The cameras head can be controlled in two
ways: The FCOIII LinX is a tiny remote
controller, moves the head and starts and
stops the selected mode.
The FCOIII RX Cable will be connected to
the models receiver, occupying up to 3
channels; two to move the head pan and
tilt, one to release the selected mode.
Both of them will be connected to the RX-
port of the camera.
Setup a new Zero-Position
To have the best viewing direction set a new Zero Position: move the head to the
the selected place and press the left and right button of the logo for 5 seconds.
Connect the FCOIII RX-Cable or the receiver of the FCOIII LinX after that.
