P a g e
|
6
Construction /
Installation Diagram
i.
Using the supplied black plastic
key, open & remove the upper
cover.
ii.
Disconnect the battery power and
remove the battery holder
iii.
Using a Philips screw driver remove
the upper right-hand Phillips screw
and remove the steel wall mount
plate (wall build-up frame).
iv.
Use the steel plate as a guide,
mark where holes need to be
drilled. Important: Make sure
bracket and case unit is mounted
level.
v.
When installing onto a concrete
wall, drill holes 30 mm deep using a
6 mm masonry drill bit. Insert wall
anchors into the holes and mount
the plate using the screws.
vi.
Slide & assemble the dispenser
onto the plate tongues, ensuring
the dispenser is secured by the two
tongues.
Summary of Contents for MagicRound ASD-0001
Page 5: ...P a g e 5 Part List...
Page 8: ...P a g e 8...
