manualshive.com logo in svg

FCCID TEW-812DRU, User Manual, Page: 3 / 90

Share
Download
FCCID TEW-812DRU User Manual Download Page 3

 

2

 

Europe – EU Declaration of Conformity 

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The 
following test methods have been applied in order to prove presumption of conformity with the 
essential requirements of the R&TTE Directive 1999/5/EC: 

- 

EN60950-1:2006

+A11: 2009

 

Safety of Information Technology Equipment 

- 

EN

 

62311:2008

 

-  Product standard to demonstrate the compliance of radio base stations and fixed terminal 

stations for wireless telecommunication systems with the basic restrictions or the reference 
levels related to human exposure to radio frequency electromagnetic fields (110MHz - 40 GHz) 
- General public 

- 

EN 300 328 V1.7.1: (2006-10) 

-  Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission 

systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread 
spectrum modulation techniques; Harmonized EN covering essential requirements under 
article 3.2 of the R&TTE Directive 

- 

EN 301 489-1 V1.8.1: (2008-04) 

-  Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic 

Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical 
requirements

 

- 

EN 301 489-17 V2.1.1:( 2009-05

) 

-  Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic 

Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for 2,4 GHz 
wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz 
Broadband Data Transmitting Systems 

- 

EN 301 893 V1.5.1(2008-12)

 

Broadband Radio Access Networks (BRAN);5 GHz high performance RLAN;Harmonized EN 
covering the essential requirements of article 3.2 of the R&TTE Directive 

-  
 
This device is a 2.4/5G GHz wideband transmission system (transceiver), intended for use in all EU 
member states and EFTA countries, except in France and Italy where restrictive use applies. 
 
In Italy the end-user should apply for a license at the national spectrum authorities in order to 
obtain authorization to use the device for setting up outdoor radio links and/or for supplying public 
access to telecommunications and/or network services. 
 
This device may not be used for setting up outdoor radio links in France and in some areas the RF   

Summary of Contents for TEW-812DRU



























































































Reviews:

No comments