C O N N E C T I N G G A S
FOLLOW THESE INSTRUCTIONS CAREFULLY TO AVOID SERIOUS DAMAGE TO
YOUR BARBECUE AND CAUSE PERSONAL INJURY.
HOSE
•
Connect the gas hose to the gas inlet on the barbecue. Tighten well.
•
Install the regulator and hose. Follow the installation instructions that came
with the controller set.
•
Do not use sealing tape, glue or liquid on the connection.
•
Gas hoses used for this product must not be longer than 120 cm.
•
Check the gas hose regularly for cracks, damage and rot.
Never use a damaged gas hose.
REGULATOR
•
Check that all controls on the control panel are in the OFF position before
connecting the regulator to the gas cylinder.
•
Connect the regulator to the gas cylinder according to your regulator and
the cylinder dealer’s instructions.
•
We recommend propane gas for use in the Nordic countries, but butane
can also be used. Butane is poorly suited for low temperatures.
•
Check that the regulator is not damaged.
•
Check that the gas cylinder is on a firm, level surface and is lower than the
gas inlet on the barbecue.
•
Use an approved gas cylinder that fits the regulator.
Cylinders of 10 kg or more are recommended.
ALWAYS PERFORM A LEAK TEST
BEFORE USING THE BARBECUE!
1.
Thread the hose all the way into the gas nipple.
2.
Place the hose clamp 0.5 - 1 cm from the end of the hose.
3.
Use a socket wrench (size 7), wrench (size 7) or screwdriver to
tighten the hose clamp and tighten well.
4.
IMPORTANT! A gas leak test must be performed as
described on next page before using the barbecue.
!
22
