
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
BURNER WILL NOT
LIGHT
Gas bottle is empty
Replace gas bottle
Damaged regulator
Check/replace the regulator
Burner is blocked
Clean the burner
Gas supply is blocked
Clean gas ventury or hose
Electrode is broken or dirty
Clean the electrode
Ignition knob is broken
Contact your dealer
Windy conditions
Place the BBQ in a less
exposed position
Ignition wire is damaged or
fitted incorrectly
Make sure wire is
mounted correct
Battery in ignitor box
is empty
Change batteries
BURNER WILL
NOT LIGHT WHEN
PERFORMING MANUAL
LIGHTING
Empty gas bottle
Replace gas bottle
Irregular gas supply
Check/replace the regulator
The burner is blocked
Clean the burner
Gas supply or hose
is blocked
Clean gas ventury or hose
LOW FLAME OR
BACKFIRE
Gas bottle is too small
10 kg or larger bottle
is recommended
Burner is blocked
Clean the burner
Gas supply or hose
is blocked
Clean gas ventury or hose
Windy conditions
Place the BBQ in a less
exposed position
TROUBLE TURNING THE
KNOBS
Gas valve jammed
Replace gas valve.
NB! Knobs should be
pressed in and turned
HEAVY SMOKE
Fatty foods on the BBQ
Trim away excess fat from
meat. Clean the fat tray.
19
Summary of Contents for CHEF's Special 3.1
