product manual
4
3)
Connect the other end of the main test line to the special connector corresponding to the car;
4)
Connect the special connector connected to the main test line with the vehicle diagnostic seat;
5)
At this point, the FV100 is powered by the vehicle diagnostic seat and the power indicator lights
are on(If not, it may be that the vehicle diagnostic seat does not have a power supply and can be
powered to the FV100 by a cigarette lighter or a battery holder).
3. 2 FV100 connection to host
After the FV100 is connected to the vehicle, it is necessary to match the connection between the
host and the FV100 before the vehicle diagnosis can be carried out; FV100 supports two ways to
communicate with tablet hosts: Bluetooth pairing and USB connections.
Through Bluetooth pairing:
1)
Turn on the tablet host power supply
2)
Select [VCI connection] on the main function menu; select connection mode [Bluetooth]
3)
Click the scan
icon on the right side of the device list, the system automatically scans
nearby Bluetooth devices;
4)
Select target Bluetooth to match.
5)
Match complete, the VCI icon in the upper right corner of the screen from “
”
to
“
” ,i
ndicates a successful Bluetooth match
，
vehicle diagnostics can be carried out.
Note: if the Bluetooth device can not be found, the transmitter may be too weak, at this time, be
as close as possible to the FV100.
USB connection is the fastest way to communicate between tablet host and FV100
；
Please use
our factory configuration of special USB cable for connection, after the connection completed, the
