product manual
3
3.1-1.
Figure 3.1-1 connection of standard OBD-
Ⅱ
interface
O
peraion Instructions:
1)
Determine the location and the interface of the diagnostic seat;
2)
Connect one end of the main test line to the DB15 interface of the FV100 and lock the fastening
bolt;
3)
Connect the other end of the main test line to the vehicle diagnosis seat.
4)
At this point, the FV100 is powered by the vehicle diagnostic seat and the power indicator lights
are on.
Note: After the test completed, rotate the fixed bolt first, then gently pull down the main test line to
avoid damage to the diagnostic interface.
Vehicles that connect to non-OBD-
Ⅱ
interfaces need to connect the main test line to the
corresponding dedicated connector, as shown in
figure 3.1-2
Figure 3.1-2 connection of non-OBD-
Ⅱ
interface
1)
Determine the location and he interface of the diagnostic seat, and if it needs an external power
supply;
2)
Connect one end of the main test line to the DB15 interface of the FV100 and lock the fastening
bolt;
