FCAR Auto Diagnostic Tool
14
Vehicle necessary conditions:
1.
Please confirm the diagnostic socket position and its shape, then check whether it needs external
power supply or not.
2.
Please select corresponding connectors according to the vehicle models and the shape of
diagnostic sockets.
3.
One end of the main testing cable is connected to the host and the other end is connected to the
diagnostic connector.
4.
Please insert the diagnostic connector that has been connected to the main testing cable into the
vehicle diagnostic socket.
5.
Please confirm the host power supply is connected and then turn on the machine.
Remark: The automobile diagnostic interface is standard OBD-II interface and two ends of the main
testing cable are separately connected to the OBD-II connector and the automobile diagnostic tool. The
process is completed after inserting the OBD-II connector into the automobile diagnostic socket, please
identify it according to the actual vehicle configuration because not all vehicles are standard OBD-II
connectors.
3.1.3
Start and Shutdown
Start: Connect the host and power supply by any method mentioned above, and then gently click the
power supply button. The host will be started.
Shutdown: After using the device, operate the touch screen and return to the desktop, gently click the
power button to turn off.
Remark: Operation time generally should be 2-3s when users turn on or turn off the machine, pressing
the power button for long time or with brute force would lead to button failure.
3.2
Start Interface Menu
3.2.1
Start LOGO Interface
Connect the power supply, press the power button, the screen shows the FCAR logo first, and then
the start progress bar will roll, now if the touch screen calibration is needed please click the screen
directly and it will enter the screen calibration interface.
If the touch screen clicks are normal, please do not click the screen.
