ANALOG BACK UP CAMERA
FCA US LLC - Body Builder Instruction
All Rights Reserved
1/15/2019
Page
7
of
9
Aim
The camera should be mounted so the lateral (cross vehicle) centerline of the camera is parallel to the lateral (cross
vehicle) centerline of the vehicle. In other words, the camera aimed straight rearward, not left or right.
The vertical aim or “look down angle” will be selected to achieve FMVSS111 compliance.
Look Down Angle Determination
The NTEA FMVSS111 field of view conformity manual and kit (NTEA # 2297) should be used to determine the
appropriate look down angle to meet FMVSS111 field of view and image size requirements.
ATTENTION
:
When the vehicle is first placed in reverse, there will be a warning
message at the top of the screen for the first 5 seconds.
THAT
WARNING MESSAGE CANNOT INTERFERE WITH THE TEST OBJECTS.
If it does, you may need to adjust the look down angle upward slightly
to compensate. Examples of images to demonstrating message
interference are in
Appendix B
Please note these are SIMULATED
images.
