Fbt 38591, Operating Manual

Page: 39 / 60

PRESET
ORIGINAL 2 FRONT: preset to be used in systems with three subwoofers; select the
ORIGINAL (1) preset on the speakers oriented toward the audience.
ORIGINAL: It is the default general purpose preset and is thus fit for the majority of
applications.
DEEP: this preset extends and emphasizes the low range of the subwoofer, for a
very deep and soft sound suitable for high quality and medium energy applications,
such as acoustic music, jazz, etc...
PUNCH: the sound of the sub becomes drier, reduced low frequency extension but
more energy concentrated in the 80-120Hz range. Suitable for rock music and high
SPL applications.
HUNG: flown installation, default equalization curve, general purpose.
HUNG PUNCH: flown installation, the sound of the sub becomes drier, reduced low
frequency extension but more energy concentrated in the 80-120Hz range.
HUNG with INFRA: The system consists of two different subwooders (MODUS
118FSA and MODUS 215FSA), one installed on the ground and the other hanging.
This type of system is the most complete and suitable to reproduce sound in great
events and over huge areas, most of all outdoor, since it permits obtaining a more
even distribution of low frequency energy over the whole listening area.
ORIGINAL 1 FRONT: preset to be used in systems with two subwoofers; select the
ORIGINAL (1) preset on the speaker oriented toward the audience.
INFRA: the filter is set to a lower frequency with respect to the other presets, thus
only very low frequencies are reproduced. Choose this preset in systems where the
MODUS 118FSA and MODUS 215FSA subwoofers are both present at the same
time.
ORIGINAL 1 FRONT: preset to be used in systems with two subwoofers; select the
ORIGINAL (1) preset on the speaker oriented toward the audience.
PUNCH: the sound of the sub becomes drier, reduced low frequency extension but
more energy concentrated in the 80-120Hz range. Suitable for rock music and high
SPL applications.
ORIGINAL: It is the default general purpose preset and is thus fit for the majority of
applications.
HUNG: flown installation, default equalization curve, general purpose.
ORIGINAL 2 FRONT: preset to be used in systems with three subwoofers; select the
ORIGINAL (1) preset on the speakers oriented toward the audience.
Every preset is identified by a letter (A - H) and indicates the minimum and maximum
number of speakers configured.
35
Every MODUS series speaker features different presets designed to adapt the speaker answer to the environment where it will be used or to
make it suitable for special uses.
Selection is made through the «PRESET» switch.
The preset are a quick and precise tool for installers or sound technicians to speed up system setup according to the most frequent usage
conditions.
1- ORIGINAL 2- DEEP
3- PUNCH 4- HUNG
5- HUNG PUNCH
6- HUNG with INFRA
7-
1 FRONT
8- 2 FRONT
ORIGINAL
ORIGINAL
215FSA