- 23 -
Using a Pager
If programmed, the system can send messages to a pager. The messages are
displayed as follows:
AC CT E X X
where:
"ACCT" = the 4-digit central station No. 1 account number set by
your system installer. We suggest that you obtain the
number from your system installer and record it here.
"ACCT" =
"E" = the event code. There are 4 event types: alarms, troubles,
openings, and closings. These event codes are as follows:
Openings = 0, Closings = 1, Alarm or Trouble = 9
"XX" = the zone (01–24) or user (1–32) designation, depending
on the event.
If multiple events occur, the signal for the highest-priority event is sent first.
Events ranked from highest to lowest priority are alarm, trouble, open, and
close.
CHANGING THE PAGER PHONE NUMBER (FOLLOW-ME)
You can change your pager follow-me phone number as follows if your
installer enabled this feature:
1. Access pager number programming by pressing the following keys in
sequence:
[#], [5], and [8]
An acknowledgement tone sounds to indicate pager number programming
has been accessed.
The [#], [5], [8] command is accessible only while the system is disarmed and
the dialer, dialer delay, and bell are not active.
In pager phone number programming mode, only the LCD keypad provides
visual display of the numbers already programmed or numbers that are being
changed. The LED and fixed-word style keypads provide no visual keypad
display of these numbers.
