System Operation (cont’d)
– 11 –
To Turn the System On In Instant Mode and Stay Inside
In INSTANT STAY mode, the perimeter portion of your burglar
alarm system is on, but the time delays are eliminated from your
normal entry/exit door(s). All interior protection is off, so you are free
to move around inside.
Check to make sure the system is READY. When it is ready, press:
INSTANT
followed by
STAY
followed by your User Code.
When the system has been turned on successfully, the ARMED LED is
on, and the following is displayed:
LCD Keypad:
ON: STAY / INS
Fixed-Word Keypad:
STAY
INSTANT
NOTE:
This system can be programmed by the installer for the
AUTOSTAY feature which automatically bypasses interior zones if
you arm the system in AWAY mode, but do not exit through a delay
zone during exit time.
