Operating the device
The Fazley PBP-03 is a practical pedal power supply designed to power (guitar)effects
pedals. By using a central power supply unit like this one, each individual guitar pedal does
not require a separate power adapter and mains socket.
Installation
This pedal power supply can be easily mounted on or underneath a pedal board. This can
be done using hook-and-loop fastener strips, tie-wraps or brackets that might have been
included with your pedal board.
When mounting this device to a pedal board, it is important to ensure that the status LED
indicators are visible at all times. It is also important that the device can be turned off and
unplugged at any time in case of emergencies.
Connecting the outputs
Install the pedal power supply in such a way that the included cables can be plugged in
without having any sharp (180-degree) bends, as this will likely cause the cables to break
over time. The cables can be bound together using cable binders as long as they aren't
pulled too tightly.
The connecting cables can be easily plugged into the appropriate connectors. The 9V
outputs each have a capacity of 100 mA. Devices that require a different voltage will not
work with this device.
Simultaneous use of all outputs at full capacity
In theory, if all outputs are being utilised at their full maximum capacity at the same time,
the power supply unit may not be able to supply the amount of power as indicated per
output.
In practice, however, it does not often happen that all the outputs on this type of power
supply are used simultaneously at full capacity and is therefore unlikely to cause a problem.
115 / 230V
This device can run on two different voltages. It has been configured in advance to run on
230V AC power, but it can also function on 115V AC power, which is common in some
countries. If you want to run this device on 115V AC power, bear in mind that you may need
a different connection cable than the one included with this product.
Voltage, polarity and power
Always check that you connect devices to the correct voltage on this power supply and also
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:
08-03-2017 RV
Revision date and author's initials: -
