the housing is not in good condition.
Contact your dealer or a qualified technician if you are unsure about the state of the device.
- Check the device and the screws for corrosion. Corrosion must not be present on this
device. Contact your dealer or a qualified technician if you find any corrosion on the screws.
Every power and signal connector should be securely mounted. Do not use the device if the
connectors are not secure.
Avoid dust and dirt build-up. Clean the device once a month by disconnecting it from the
power supply and wiping it down with a dry or slightly moist cloth. If the device is used
frequently, the cleaning intervals should increase.
Symbol explanation:
WEEE:
Ensure that this device is disposed of properly. This product falls under
the WEEE (Waste Electrical and Electronic Equipment) directive. The
requirements of this directive apply to all manufacturers and producers of
electronic devices in the EU. Do not throw this product away with regular
rubbish. Please contact your local authority for more information about how to
recycle and dispose of these products in your region. By recycling this product
in the proper manner, we can work together to ensure that we can continue to
enjoy these kinds of products and still protect the environment as much as
possible from pollution.
CE:
The CE logo indicates that this product meets the European norms and
requirements to which it must legally conform.
Only suitable for indoor use
: this product was only designed for indoor use.
The maximum environmental temperature must not exceed 40 degrees
Celsius (104 degrees Fahrenheit).
Battery Safety:
PLEASE NOTE!
There is an explosion risk if the battery is not correctly removed.
Only replace a battery with the same battery type and specifications.
Do not expose batteries to intense heat, including sunlight, fire and similar intense heat
sources.
Do not leave batteries exposed to high temperatures for prolonged periods as this can
cause explosions and the leakage of flammable liquids and gas.
Do not expose batteries to an open flame and do not place batteries in a hot oven.
Do not cut, dent, or try to change the shape of the battery in any way, since this can cause
explosions and the leakage of flammable liquids and gas.
Do not expose batteries to extremely low air pressures (high altitudes), since this can cause
All information and illustrations shown in this user manual are subject to change without further notice.
Version:
1.0
Creation date + author initials:
16-07-2020 RV
Revision date + author initials: -
