faytech Ltd. 2009
C
44
Setting up the faytech Touch software
Normal-Mode
Click on touch
Click on release
function in touch
Click on touch without moving cursor
Click on release without moving cursor
: Allows the user to select an object or drag an object with the
touch pen or a finger. This is the best mode to use for most applications.
: The
“
click
”
is recognized when the screen is touched. To
initiate a new mouse-click, the display must be released and re-pressed.
: Contrary to the click
, it is
a
click when the display is released.
:
: The cursor does not move to
the touch position except at the lift-off point. For a better understanding of
generated
The first touch point generates a
click. The cursor follows the finger / pen movement.
For a better
understanding of this setting, try it with the
application under the
tab.
Draw Test
Tools
To the right of the mouse icon are options to set different mouse-like modes.
Normal mode offers the most intuitive touch-operation.
45
Setting up the faytech Touch software
setting, try it with the Draw Test application under the Tools tab.
On the far right of the mouse icon, there is an
button. The following
options are available for the faytech display in this submenu:
is the function to check to enable the driver to
determine if the most recent touched position is the same as the previously
touched point. If the difference is smaller than the defined area, the driver
does not generate any mouse movement which helps reduce system load.
If the touch screen is touched for a specified time,
the driver will generate a mouse right button click if this function is enabled.
Be careful! If you don't check this box, the touch function will
not work!
A software filter exists inside the driver to filter
some noise to stabilize and smooth the touch points. When activated, the
user will experience a more stable cur
Option
Enable Constant Touch:
Enable Auto Right Click:
Enable Touch:
Enable Cursor Stablization:
sor.
l
l
l
l
