manualshive.com logo in svg

Fayat Dynapac DFP6, Operating Instruction

Share
Download
Fayat Dynapac DFP6 Operating Instruction Download Page 50

5.1  Notes on safety

If the following tests reveal damages or other defects, the machine

must not be operated, until these deficiencies have been corrected.

Do not operate the machine with defective indicators and control

elements.

Safety installations must not be removed or made ineffective.

Do not change any fixed settings.

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protec-

tion regulations must be followed when han-

dling fuels and lubricants

 

Ä

 Chapter 3.4 „Han-

dling fuels and lubricants“ on page 25

.

WARNING!
Danger of injury caused by rotating parts!

–

Before starting work on the machine make sure

that the engine can not be started.

1.

Park the machine safely

 

Ä

 Chapter 6.6 „Parking the machine

in secured condition“ on page 67

.

Checks prior to start up – Notes on safety

 

DFP6

 

50

Summary of Contents for Dynapac DFP6





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands