Fayat Dynapac CC1100C VI, Instruction Manual, Page: 122 / 207

Maintenance, 10h
4812163101_A.pdf 2018-12-14
Fuel tank - Filling
Fig. Fuel tank
1. Filler cap
1
Refuel the tank every day before starting work.
Open the engine hood, unscrew the tank cap (1) fill
with diesel up to the lower edge of the filler pipe.
T4F/Stage IV Kubota engines require the use of
Ultra Low Sulphur Diesel (ULSD) fuel, which has
a sulphur content of 15 ppm (parts per million) or
less. Higher sulphur contents cause operating
problems and put the useful life of components at
risk, which can lead to engine trouble. T4F/Stage IV Kubota engines require the use of
Ultra Low Sulphur Diesel (ULSD) fuel, which has
a sulphur content of 15 ppm (parts per million) or
less. Higher sulphur contents cause operating
problems and put the useful life of components at
risk, which can lead to engine trouble.
Stop the diesel engine. Short-circuit (press) the
filler gun against a non-insulated part of the roller
before refuelling, and against the filler pipe while
refuelling. Stop the diesel engine. Short-circuit (press) the
filler gun against a non-insulated part of the roller
before refuelling, and against the filler pipe while
refuelling.
Never refuel while the engine is running. Do not
smoke and avoid spilling fuel. Never refuel while the engine is running. Do not
smoke and avoid spilling fuel.
The fuel tank holds 46 liters (47.6 qts).
Water tank - Filling
Fig. Water tank
1. Tank cap
1
Unscrew the tank cap (1) and fill with clean water.
Do not remove the strainer. See technical
specifications for the tank volume. Unscrew the tank cap (1) and fill with clean water.
Do not remove the strainer. See technical
specifications for the tank volume.
Only additive: A small amount of
environment-friendly antifreeze. Only additive: A small amount of
environment-friendly antifreeze.
108