Wait until the engine has stopped, then wait approx. another 15
minutes.
Keep out of the danger zone during the initial test run.
In case of leaks return to the workshop immediately.
Drain the engine oil at operating temperature – danger of scalding!
Wipe off spilled oil, collect leaking oil and dispose of it in an envi-
ronmentally friendly way.
Store used filters and other oil contaminated materials in a sepa-
rate, specially marked container and dispose of them in an environ-
mentally friendly way.
The settings for idle speed and highest speed must not be
changed, since this would affect the exhaust gas values and cause
damage to engine and power train.
Engine and exhaust system work at high temperatures. Keep com-
bustible materials away and do not touch any hot surfaces.
Check and change coolant only when the engine is cold. Collect
coolant and dispose of it in an environmentally friendly way.
1.2.10.4
Maintenance work on electric components and battery
Before starting to work on electric parts of the machine disconnect
the battery and cover it with insulating material.
Do not use fuses with higher ampere ratings and do not bridge
fuses.
When working on the battery, smoking or open fire is prohibited!
Do not lay any tools or other metal objects on the battery.
Do not wear jewellery (watch, bracelets, etc.) when working on the
battery.
The connection cables of the battery must not touch or rub against
machine parts.
1.2.10.5
Working on the air conditioning
Faults on the air conditioning should only be remedied by author-
ized service personnel.
Do not perform welding work in the vicinity of the air conditioning.
Danger of explosion!
Do not clean the condenser in the air conditioning system with a
hot water jet. Danger of explosion!
Do not release refrigerant into the atmosphere, but dispose of it in
an environmentally friendly way.
General – Concerning your safety
BW 161 AC-50 / BW 161 AD-50 / BW 161 ADO-50
29
