background image

1.2.4.4  Safety regulations and environmental protection regulations for handling hydraulic oil

WARNING!

Danger of injury caused by escaping pressure

fluid!

– Always depressurize the hydraulic system

before starting work in the hydraulic system.

– Wear your personal protective equipment (pro-

tective gloves, protective clothing, goggles).

Should pressure fluid penetrate the skin, imme-

diate medical help is required.

WARNING!

Danger of burning by ignited hydraulic oil!

– Do not allow hydraulic oil to come into contact

with hot components.

– Smoking and open fire is prohibited!

– Wear your personal protective equipment (pro-

tective gloves, protective clothing).

CAUTION!

Health hazard caused by contact with hydraulic

oil!

– Wear your personal protective equipment (pro-

tective gloves, protective clothing).

– Do not inhale any oil vapours.

– Avoid contact.

CAUTION!

Danger of slipping on spilled oil!

– Immediately bind spilled oil with an oil-binding

agent.

ENVIRONMENT!

Oil is an environmentally hazardous substance!

– Always keep oil in proper containers.

– Immediately bind spilled oil with an oil-binding

agent.

– Dispose of oil and oil filter according to regula-

tions.

Fig.  3

General – Concerning your safety

 

BW 161 AC-50 / BW 161 AD-50 / BW 161 ADO-50

 

20

Summary of Contents for BOMAG BW 161 AC-50










































Reviews: