Operation
BOMAG
31
BPR 25/40, BPR 25/50
4.7
Loading
!
Danger
Danger of accident!
Make sure that persons are not endangered by
the machine tipping or sliding off.
Lash the machine down, so that it is secured
against rolling, sliding and turning over.
For lifting the machine attach the lifting gear
only to the lifting point (cross strut on the en-
gine protection bow).
Check lifting eye for damage before use. Do
not use a damaged or in any other way im-
paired lifting eye.
The machine must not swing about when be-
ing lifted.
Do not step or stand under suspended loads.
Use only safe lifting gear of sufficient load
bearing capacity
Fig. 31
l
Set the steering rod (Fig. 31) to upright posi-
tion.
l
Engage the locking pin securely.
Fig. 32
l
Always attach the lifting gear (rope) to the lift-
ing eye to load the vibratory plate on a trans-
port vehicle (Fig. 32).
!
Danger
Danger of accident!
Minimum lifting capacity of lifting gear: see op-
erating weight in chapter "Technical Data".
!
Danger
Danger of accident!
Tie the machine down on the transport vehicle,
so that it is secured against slipping, sliding
and turning over!
Go
to
Discount-Equipment.com
to
order
your
parts